Parts

Generator Fuel Cock P54392 This replacement Generator Fuel Cock assembles in just minutes and is compatible with several of our generators, all...

8.5-inch Sanding Pad for WEN 6369   Part Number: 6369-003   Compatible with the following Model: WEN 6369 Variable Spe...

Replacement blades for the WEN 6550 12.5-Inch Thickness Planer The distance from the ends to the center of the first hole is 2.3125 inches. The hol...

Cog Belt (150XL037) for WEN 6502   Part Number: 90228-060   Compatible with the following Model: WEN 6502 4 x 36-Inch...

Planer Blade (Set of Two) for WEN 6534   Part Number: 6534B   Compatible with the following Model: WEN 6534 8-Amp 4-3...

Upper/Lower Blade Holder for WEN 3920B     Screw Hex Socket M4X16 NOT INCLUDED Part # 3920B-033   Part Number: 3920B...

Trigger Switch-Item: 70711-116 Fits: 10" Sliding Compound Miter Saw Model: 70711

6552-043 Replacement Blades (Set of 3) Fit WEN 6552 13-Inch 3-Blade Benchtop Thickness Planer ( Reversible blades ) 2-9/16" from the Edges to...

Generator Engine Switch P54296 This replacement Generator Engine Switch assembles in just minutes and is compatible with several of our generat...

Carburetor Assembly for WEN 56200i   Part Number: 56200-1304B   Compatible with the following Model: WEN 56200i 2000 Watt Inverter Generator,...

Recoil Starter Assembly-Item: P54859 Fits: All WEN 5500, models 7000E, model 56682 9000E, model 56877 PowerPro Technology 6800, mode...

This replacement Generator Carburetor Assembly assembles in just minutes and is compatible with several of our generators, all of which will make s...

Coil Spring and Cap Assembly for WEN 4210   Part Number: 4210B-031/32   Compatible with the following Model: WEN 4210...

Generator Carburetor Complete P54804 for WEN 56551 5500 Watt Generator and Powermate PC0105007 5000 Watt Generator  This replacement Generator ...

Recoil Starter-Item: P54603 Fits: PowerPro Technology 4050, model 56405 4050 CARB, model 56415 Plate Compactor Model 56035 Wen 56400M...

Click here for additional WEN 3975 and 3975T 5-Inch Metal-Cutting Benchtop Bandsaw replacement blades Measures in at 56-1/2 by 1/2 inches in size ...

Bevel Gear (Set of 4) for WEN 6550   Part Number: 6550-134   Compatible with the following Model: WEN 6550 12.5-Inch B...

Bearing Block for WEN 6552 and 6550   Part Number: 6550-252   Compatible with the following Model: WEN 6552 13-Inch 3...

This replacement Generator Air Cleaner Assembly is compatible with several of our generators, so that you can bring power to where you need it the ...

Part 56200i-HA68 High Altitude Kit 6000-8000 feet   High Altitude Kit up to 6000-8000 feet. Compatible with the following model: WEN 56200i 2000...

Big Pulley Item: 56663-023 ----6 inches in diamete   Fits: Model: 5662 WEN Snow Blaster Electric Snow Thrower, 18 Inch Fits model 57613  

Generator Battery for WEN 56475 4750 Watt Electric Start Generator This Generator Battery, meant to replace the original battery in your genera...

Screw Hex Socket M4X16 for WEN 3920B   Part Number: 3920B-033 To determine if this is the correct model for your item, please che...

WEN Track Saw Guide Rail Adapter   Part Number: 36027-013   Compatible with the following Model: WEN 36055 9-Amp Plun...

WEN 3966-035-050 1/2-Inch Band Saw Blade (100-3/4-Inch Length)   Part Number: 3966-035-050   ( 5 TPI )   Compatible w...

Item 3962-118 Band Saw Table Insert Fits: WEN 3962 10-Inch Two-Speed Band Saw with Stand and Worklight

Fuel Gauge -Item: P54374 Fits: WEN  3500, model 56352 5500, model 56551 7000E, model 56682 9000E, model 56877 PowerPro Technol...

Part 56200i-HA36 High Altitude Kit 3000-6000 feet   High Altitude Kit up to 3000-6000 feet. Compatible with the following model: WEN 56200i 2000...

Belt Item: 56663-024 PJ670 Fits: Model: 5662 WEN Snow Blaster Electric Snow Thrower, 18 Inch Note: this belt does not fit the orange WEN Snow Blast...

Handle Lever (Throttle Cable Assembly)-Item: 56035-046 Fits: Plate Compactor Model 56035

Generator Brush Assembly P54332  This replacement Generator Brush Assembly assembles in just minutes and is compatible with several of our generato...

WEN 3966-035-025 1/4-Inch Band Saw Blade (100-3/4-Inch Length)   Part Number: 3966-035-025   ( 7 TPI )   Compatible w...

WEN 3962-021-050 1/2-Inch Band Saw Blade (72-Inch Length)   Part Number: 3962-021-050   ( 6 TPI )   Compatible with t...

Part PW31-036 High Pressure Hose   High Pressure Hose Replacement Part. Compatible with the following model: WEN PW31 Gas ...

This Generator Voltage Regulator, meant to replace the original voltage regulator in your generator, installs in just minutes and is compatible wit...