Power Tools

Powerful 15-amp variable speed soft start motor provides speeds from 8,000 to 23,000 RPM Plunging base locks in downward position for functionalit...

Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel Includes a 1/2-inch keyed chuck and onboard key storage Operates at ...

Spiral cutterhead utilizes 26 staggered and rotatable HSS blades for a clean, smooth finish Onboard material removal gauge informs users about the...

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size Spacious 14-1/8...

5 speeds offer a range of 570 - 3050 RPM Linear scale depth adjustment sets the depth of the drill bit for repetitive and precise drilling 1/2 in....

Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise Spacious 25-5/8-by-16-inch steel table bevels up...

Plane boards up to 6 inches thick and 13 inches wide 15A motor generates 30,000 cuts per minute at a 26 feet per minute feed rate Includes three r...

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish Features a spacious 30-by-6-inch table Remove 0 to 1/8 of an i...

Mid-mounted 6.3-amp motor minimizes the weight of the sanding head, making the sander easier to maneuver Improved hole configuration maximizes dus...

Circulate the air in a 400 square foot room up to 7.5 times per hour Three-speed operation flows air at a rate of 300, 350, or 400 cubic feet per ...

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc Belt tilts anywhere from 0 to 90 degrees Sturdy cast iron base...

Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead 10-amp motor provides up to 20,000 cuts per minute anywhere fr...

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity Variable speed goes from 400 to 16...

Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects Internal jaws tighten around workpieces varying from 1.6 ...

Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts Create 45-degree bevel cuts in boards up to 1-5/8 inches t...

2.8 amp motor rotates the blade up to 2460 feet per minute Create cuts up to 3-5/8 inches deep and 9 inches wide Uses 62-inch blades anywhere from...

Powerful 15-amp motor cuts boards up to 13-3/8 inches wide and 3-1/2 inches thick Bevel and miter 45 degrees in either direction (featuring 9 mite...

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt Operate with belt speeds up to 1575 FPM and...

Remember when you had a clean work shop? Control the mess and minimize cleanup with the WEN 1,500 CFM 5-Micron Dust Collector. This powerful motor ...

Remember when you could support your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/...

Air Filtration Outer Filter (2 Pack) for the WEN 3410 Air Filtration System Remember when your workshop was full of clean air? Air-borne dust p...

NOTE: This item has been discontinued. Please check out model 3421 for an alternative lathe. Adjust the variable speed anywhere from 750 to 3200 r...