For the Woodworker

Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise Spacious 25-5/8-by-16-inch steel table bevels up...

Spiral cutterhead utilizes 26 staggered and rotatable HSS blades for a clean, smooth finish Onboard material removal gauge informs users about the...

Unique side panel flips open for easy-access blade changes Variable speed goes from 550 to 1600 strokes per minute Spacious 16-by-10-inch table be...

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish Features a spacious 30-by-6-inch table Remove 0 to 1/8 of an i...

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size Spacious 14-1/8...

Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel Includes a 1/2-inch keyed chuck and onboard key storage Operates at ...

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity Variable speed goes from 400 to 16...

2.5 amp motor rotates the blade up to 2500 feet per minute Create cuts up to 3-1/2 inches deep and 9 inches wide Uses 59-1/2 inch blades anywhere ...

2.8 amp motor rotates the blade up to 2460 feet per minute Create cuts up to 3-5/8 inches deep and 9 inches wide Uses 62-inch blades anywhere from...

6 Amp motor provides up to 34,000 cuts per minute 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches Make rabbets up to 1 in...

7-Amp motor rotates the belt at over 13 feet per second Compact design weighs in at a mere six pounds to limit the fatigue of the user Includes a ...

Plane boards up to 6 inches thick and 13 inches wide 15A motor generates 30,000 cuts per minute at a 26 feet per minute feed rate Includes three r...

4-inch spindle travel makes drilling through 4x4 boards easier than ever Adjust the variable speed anywhere from 280 RPM to 3300 RPM Digital speed...

Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for ...

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc Belt tilts anywhere from 0 to 90 degrees Sturdy cast iron base...

5 speeds offer a range of 570 - 3050 RPM Linear scale depth adjustment sets the depth of the drill bit for repetitive and precise drilling 1/2 in....

4-3/4-inch spindle travel makes drilling through 4x4 boards easier than ever Three-spindle design provides twelves speeds from 150 to 3150 RPM Hig...