Shop Here
Shop Here
3-in-1 Hardwood Flooring Nailer Hardwood flooring nailer provides the power to tighten flooring boards while driving fastener into the subfloor. Th...
View full details3.75 / 5.0
4 Reviews
Switch the firing angle between 21 degrees, 28 degrees, and 34 degrees Flip a switch to easily change shooting modes from single to sequential fir...
View full details4.303030303 / 5.0
33 Reviews
Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inch Adjustable shingle guide and depth control makes for easy shingle spacing d...
View full details4.0 / 5.0
1 Review
Drives 30-degree to 34-degree paper collated fasteners Features adjustable exhaust with a 1/4 inch NPT air inlet fitting Magazine holds up to 100 ...
View full details4.533333333 / 5.0
15 Reviews
Remember when you could rely on your tools? Nail nails and fasten fasteners with the WEN 21-Degree Framing Nailer. Our spacious nailer holds up t...
View full detailsDrive 18-gauge brad nails anywhere from 5/8 to 2 inches in length Shoot 1/4-inch narrow crown staples anywhere from 1/2 to 1-5/8 inches in length...
View full details4.857142857 / 5.0
7 Reviews
Remember when you had a powerful nailer to finish the job? The WEN 16-Gauge Pneumatic Finish Nailer is the perfect companion for crown molding, c...
View full detailsShoot 18-gauge brads ranging from 5/8 to 2 inches long Fire 1/4-inch crown staples ranging from 5/8 to 1-5/8 inches long Features a depth adjust...
View full details5.0 / 5.0
5 Reviews
Shoot 18-gauge brads ranging from 3/8 to 2 inches in length Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting Features a depth ad...
View full details4.0 / 5.0
5 Reviews
Drive 1/4-inch crown 18-gauge staples ranging from 3/8 to 1 inch long Features an adjustable 360-degree air exhaust and a 1/4 inch NPT air inlet f...
View full detailsPerfect for upholstery, woodworking, trim work, vinyl installation and more Shoot 3/8-inch crown staples ranging from 1/4 to 9/16 inches in lengt...
View full details4.411764706 / 5.0
17 Reviews
NOTE: This item has been discontinued. Please check out model 61722 for an alternative pneumatic stapler. Remember when your nailer was a stapler...
View full details4.772727273 / 5.0
88 Reviews
Shoot 18-gauge brads ranging from 3/8 to 2 inches in length Operate at 60 to 115 PSI with the 1/4-inch NPT air inlet fitting Features a depth ad...
View full details5.0 / 5.0
2 Reviews
WEN 20-Gauge Stapler Item: 61702 Remember when you had a reliable stapler? The WEN 20-Gauge Stapler effortlessly shoots 3/8-inch crown staples ...
View full details