Answers to FAQs about band saws, as well as basic troubleshooting steps for WEN band saws. If you're still having problems after checking these steps, please don't hesitate to contact us.
My band saw won't cut straight.
Check your owner's manual for specific procedures. Make sure the blade is properly tensioned, that it is tracking properly, that it is not warped, that the drive wheels' tires aren't worn down, and that all guide bearings (if applicable) are properly adjusted. Make sure the fence is being used (if applicable), and that the blade guides are as close as possible to the workpiece without touching it. This will minimize blade deflection.
My blade keeps slipping off the wheels.
Check your owner's manual for specific procedures. Make sure the blade is properly tensioned, that it is tracking properly, that it is not warped, that the drive wheels' tires aren't worn down, and that all guide bearings (if applicable) are properly adjusted.
My blade keeps breaking.
Make sure the blade is properly tensioned, that it is not warped, that it is not worn down, and that all guide bearings (if applicable) are properly adjusted. Reduce your feed rate (the speed at which the material moves through the blade). If applicable, make sure the blade speed is set properly for the material at hand.
Is there a riser block kit available for my band saw?
Currently, WEN does not offer any riser block kits for any of our band saws.