WEN 4227 17-inch 13-Amp Twelve-Speed Floor Standing Drill Press
NOTE: This item has been discontinued. Please check out model 4227T for a replacement Floor Standing Drill Press.
- 4-3/4 inch spindle travel makes drilling through 4x4 boards easier than ever
- Three-spindle design provides twelves speeds from 180 to 2940 RPM
- Includes a precision laser, a 5/8 inch chuck, onboard key storage, and a two-year warranty
- 14-inch by 14-inch cast iron work table pivots up to 45 degrees in both directions
- Range of speeds accommodates metal, hardwood, softwood, plastic and more
- Base Dimensions: 20" x 13"
- Large 14'' x 14'' precision ground work table features Two T-slot grooves (Center to center 4 3/8" )
- Height 66"
- Motor----120 V, 60Hz, 13A, 1-1/2 HP
- Chuck Type--JT3
- Chuck capacity smallest is 1.5mm (approx. 1/16 inch), largest is 13mm (approx. 1/2 inch)
- Stroke--4-3/4 in.
Remember when power tools were actually powerful? The WEN 17-inch 13-Amp Twelve-Speed Floor Standing Drill Press meets the needs of both home and professional users. This model includes a full 4-3/4 inches of stroke capacity, allowing users a large enough spindle travel to easily drill through a 4x4 board. Adjust the speed to 12 different stops between 180 to 2940 RPM (180, 290, 320, 400, 520, 560, 1000, 1240, 1520, 1720, 2150, and 2940 RPM). The 14-in. by 14-in. cast iron table features a 1 in. coolant runoff channel around the outer lip of the table to prevent both the workpieces and the drill bits from overheating. The table also pivots up to 45 degrees in both directions and can be positioned up to 26 in. away from the chuck to accommodate even the largest of workpieces. The laser pointer ensures maximum precision during drilling operations, creating an X through the center of your target. The JT3 chuck accepts bits anywhere from 1/8 to 5/8 inches in size with onboard key storage to make sure that the chuck key is always close by. Cast iron frame and base gives the machine a hefty support system to prevent the drill press from walking or vibrating during operation. And because it is a WEN product, the WEN 17-inch 13-Amp Twelve-Speed Floor Standing Drill Press comes backed by a 2-year warranty, a nationwide network of skilled technicians and a friendly customer service team. Remember when you had the capacity to drill through a 4X4 all in one smooth stroke? Remember WEN.